供應
四氟產品
四氟資訊
四氟企業
行情
知道
圖庫
四氟百科
歡迎來到中國四氟網
我的商務中心
- 個人中心
- 供應商后臺
手機版
手機版
| 標準號 | 標準名稱 | 英文名稱 |
| ASTM D1675-03（2011） | 聚四氟乙烯管的試驗方法 | Test Methods for Polytetrafluoroethylene Tubing |
| ASTM D2686-06（2012) | 聚四氟乙烯壓敏電絕緣膠帶規范 | Specification for Polytetrafluoroethylene-backed Pressure-Sensitive Electrical Insulating Tape |
| ASTM D1710-08 | 聚四氟乙烯(PTFE)基本型材，棒材和厚壁管材 | Polytetrafluoroethylene (PTFE) Basic Shapes, Rod and Heavy-Walled Tubing |
| ASTM D3295-06(2011) | 聚四氟乙烯管 | Standard Specification for PTFE Tubing, Miniature Beading and Spiral Cut Tubing |
| ASTM D3369-01 | 聚四氟乙烯樹脂澆鑄薄膜 | Polytetrafluoroethylene (PTFE) Resin Cast Film |
| ASTM D4441-04(2010) | 聚四氟乙烯的水分散體規范 | Standard Specification for Aqueous Dispersions of Polytetrafluoroethylene |
| ASTM D4745-11 | 聚四氟乙烯模壓和擠出材料的填充化合物 | Standard Specification for Filled Compounds of Polytetrafluoroethylene (PTFE) Molding and Extrusion Materials |
| ASTM D4894-07 | 聚四氟乙烯造粒料和柱塞擠出料規范 | Specification for Polytetrafluoroethylene (PTFE) Granular Molding and Ram |
| ASTM D4895-10 | 聚四氟乙烯分散樹脂規范 | Specification for Polytetrafluoroethylene (PTFE) Resins Produced from Dispersion |
| ASTM D4969-07(2012) | 聚四氟乙烯(PTFE)涂覆玻璃織物 | Standard Specification for Polytetrafluoroethylene-(PTFE) Coated Glass Fabric |
| ASTM D3308-12 | 聚四氟乙烯車削膜 | Standard Specification for PTFE Resin Skived Tape |
| ASTM D6040-12 | 非燒結聚四氟乙烯(PTFE)擠出薄膜或帶的試驗方法 | Standard Guide to Standard Test Methods for Unsintered Polytetrafluoroethylene (PTFE) Extruded Film or Tape |
| ASTM D6457-08(2013) | 聚四氟乙烯擠出和模壓棒和厚壁管 | Specification for Extruded and Compression Molded Rod and Heavy Walled Tubing Made from Polytetrafluoroethylene (PTFE) |
| ANSI/ASTM D1457-1992 | 聚四氟乙烯(PTFE)模塑和擠出材料規范(08.01) | Specification for Polytetrafluoroethylene (PTFE) Molding and Extrusion Materials (08.01) |
| ANSI/NEMA HP3-2000 | 電子和電氣用ET(250V)、E(600V)和EE(1000V)型PTFE(聚四氟乙烯)絕緣高溫架空電線 | Electrical and Electronic PTFE (Polytetrafluoroethylene) Insulated High Temperature Hook-Up Wire, Types ET (250 Volt), E (600 Volt) and EE (1000 Volt) |
| ASTM D1457-1992 | 聚四氟乙烯模塑及擠壓成型物料 | Polytetrafluoroethylene (PTFE) Molding and Extrusion Materials |
| ASTM D3293-1991 | 聚四氟乙烯樹脂模壓薄板 | PTFE Resin Molded Sheet |
| ASTM E911-1998 | 有聚四氟乙烯(PTFE)插頭的玻璃管旋塞閥標準規范 | Standard Specification for Glass Stopcocks with Polytetrafluoroethylene (PTFE) Plugs |
| ASTM D1710-2002 | 擠制和壓模聚四氟乙烯(PTFE)桿材和厚壁管材的標準規范 | Standard Specification for Extruded and Compression Molded Polytetrafluoroethylene (PTFE) Rod and Heavy-Walled Tubing |
| ASTM D3294-2003 | 聚四氟乙烯樹脂模壓薄板和基本模壓型材的標準規范 | Standard Specification for PTFE Resin Molded Sheet and Molded Basic Shapes |
| ASTM D6457-2004 | 聚四氟乙烯制擠壓和壓縮模塑桿和厚壁管的標準規范 | Standard Specification for Extruded and Compression Molded Rod and Heavy-Walled Tubing Made from Polytetrafluoroethylene (PTFE) |
| ASTM D6585-2005 | 非燒結聚四氟乙烯(PTEE)擠制薄膜或帶材的標準規范 | Standard Specification for Unsintered Polytetrafluoroethylene (PTFE) Extruded Film or Tape |
| ASTM D7193-2005 | 非飽和加色劑的聚四氟乙烯(PTFE)擠制薄膜或窄條帶材的標準規范 | Standard Specification for Unsintered Pigmented Polytetrafluoroethylene (PTFE) Extruded Film or Tape |
| ASTM D1675-2003 | 聚四氟乙烯管的標準試驗方法 | Standard Test Methods for Polytetrafluoroethylene Tubing |
| ASTM D2686-2006 | 聚四氟乙烯背面壓敏電絕緣膠帶的規范 | Standard Specification for Polytetrafluoroethylene-Backed Pressure-Sensitive Electrical Insulating Tape |
| NF C93-643-145-2002 | 絕緣軟套管.第3部分:各種型號套管的規范.表145-147:擠壓聚四氟乙烯套管 | (Flexible insulating sleeving - Part 3 : specifications for individual types of sleeving - Sheets 145 to 147 : extruded PTFE sleeving.) |
| NF C93-643-201-1993 | 軟絕緣套筒規范.第3部分:專用套筒的規范要求.第240 -243 活頁:熱收縮聚四氟乙烯(PTFE)套筒 | (Specification for flexible insulating sleeving. Part 3 : specification requirments for individual types of sleeving. Sheet 201 : heat shrinkable sleeving, general purpose, flexible, cross-linked PVC, shrink ratio 2:1.) |
| NF E29-902-3-1997 | 法蘭及其接頭.PN指定法蘭用墊圈的尺寸.第3部分:非金屬聚四氟乙烯封裝墊圈 | (Flanges and their joints. Dimensions of gaskets for PN-designated flanges. Part 3 : non-metallic PTFE envelope gaskets.) |
| NF S60-202-1994 | 防火.滅火介質.鹵代烴.第1部分:聚四氟乙烯1211和聚四氟乙烯1301規范 | (Fire protection. Fire extinguishing media. Halogenated hydrocarbons. Part 1 : specification for halon 1211 and halon 1301.) |
| NF C93-643-240-2003 | 絕緣軟管.第3部分:各種型號軟管規范.第240至243篇:熱收縮聚四氟乙烯絕緣軟套管(PTFE) | (Flexible insulating sleeving - Part 3 : specifications for individual types of sleeving - Sheets 240 to 243 : heat-shrinkable PTFE sleeving.) |
| NF S60-205-1994 | 防火.滅火介質.鹵代烴.第2部分:聚四氟乙烯1211和聚四氟乙烯1301安全操作和運輸規程的實施標準 | (FIRE PROTECTION. FIRE EXTINGUISHING MEDIA. HALOGENATED HYDROCARBONS. PART 2 : CODE OF PRACTICE FOR SAFE HANDLING AND TRANSFER PROCEDURES OF HALON 1211 AND HALON 1301. (EUROPEAN STANDARD EN 27201-2).) |
| NF T47-820-7-2001 | 結構軸承.第7部分:球柱和滾柱聚四氟乙烯軸承 | (Structural beairings - Part 7 : spherical and cylindrical PTFE bearings.) |
| NF C93-585-2-2002 | 射頻電纜.規范.第2部分:聚四氟乙烯絕緣的半硬性射頻和同軸電纜.分規范 | (Radio-frequency cables - Specifications - Part 2 : semi-rigid radio-frequency and coaxial cables with polytetrafluoroethylene (PTFE) insulation - Sectional specification.) |
| NF T51-550-2-1998 | 塑料.聚四氟乙烯(PTFE)半成品.第2部分:試樣的制備和特性的測定 | (PLASTICS. POLYTETRAFLUOROETHYLENE (PFTE) SEMI-FINISHED PRODUCTS. PART 2 : PREPARATION OF SPECIMENS AND DETERMINATION OF PROPERTIES. (EUROPEAN STANDARD EN ISO 13000-2).) |
| NF T51-550-1-1998 | 塑料.聚四氟乙烯(PTFE)半成品.第1部分:要求和標識 | (PLASTICS. POLYTETRAFLUOROETHYLENE (PTFE) SEMI-FINISHED PRODUCTS. PART 1 : REQUIREMENTS AND DESIGNATION. (EUROPEAN STANDARD EN ISO 13000-1).) |
| EN 60454-3-14-2001 | 電工用壓敏粘帶 第3部分：.單項材料規范 活頁14：涂壓敏粘合劑的聚四氟乙烯薄膜帶 | Pressure-sensitive adhesive tapes for electrical purposes - Part 3: Specifications for individual materials; Sheet 14: Polytetrafluoroethylene film tapes with pressure-sensitive adhesive (IEC 60454-3-14:2001) |
| EN 60684-3-145 bis 147-2001 | 絕緣軟管 第3部分：各種型號軟管規范 活頁145至147：擠壓聚四氟乙烯(PTFE)軟管 | Flexible insulating sleeving - Part 3: Specifications for individual types of sleeving; Sheets 145 to 147: Extruded PTFE sleeving (IEC 60684-3-145 to 147:2001) |
| EN 61196-2-2003 | 射頻電纜 規范 第2部分：聚四氟乙烯(PTFE)絕緣半硬射頻同軸電纜分規范 | Radio-frequency cables - Part 2: Sectional specification for semi-rigid radio-frequency and coaxial cables with polytetrafluoroethylene (PTFE) insulation (IEC 61196-2:1995) / Note: Endorsement notice |
| EN ISO 13000-1-1997 | 塑料 聚四氟乙烯(PTFE)半成品 第1部分：要求和命名 | Plastics - Polytetrafluoroethylene (PTFE) semi-finished products - Part 1: Requirements and designation (ISO 13000-1:1997) |
| EN ISO 13000-2-1997 | 塑料 聚四氟乙烯(PTFE)半成品 第2部分：試樣的制備和性能的測定 | Plastics - Polytetrafluoroethylene (PTFE) semi-finished products - Part 2: Preparation of test specimens and determination of properties (ISO 13000-2:1997) |
| EN 751-3-1996+AC-1997 | 接觸第1、2、3家庭用燃?xì)夂蜔崴慕饘俾菁y接頭的密封材料 第3部分：非燒結過的聚四氟乙烯密封帶 | Sealing materials for metallic threaded joints in contact with 1st, 2nd and 3rd family gases and hot water - Part 3: Unsintered PTFE tapes |
| EN 60684-3-240 bis 243-2002 | 絕緣軟套管 第3部分：個別型號套管規范 活頁240至243：熱收縮聚四氟乙烯套管 | Flexible insulating sleeving - Part 3: Specifications for individual types of sleeving; Sheets 240 to 243: Heat-shrinkable PTFE sleeving (IEC 60684-3-240 to 243:2002) / Note: Endorsement notice |
| UL 2006-1997 | 聚四氟乙烯1211的回收/再利用設備 | (Halon 1211 recovery/recharge equipment ) |
| UL 2083-1996 | 聚四氟乙烯1301回收/再利用設備 | (Halon 1301 recovery/recycling equipment ) |
| BS 2782-3 Method 327A-1993 | 塑料試驗方法.第3部分:機械性能.方法327A:聚四氟乙烯制品抗拉強度與斷裂伸長率測定 | Methods of testing plastics - Mechanical properties - Determination of tensile strength and elongation at break of polytetrafluoroethylene (PTFE) products |
| BS 6564-3-1990 | 聚四氟乙烯(PTFE)材料和制品.第3部分:填充聚四氟乙烯的E類玻璃纖維規范 | Polytetrafluoroethylene (PTFE) materials and products - Specification for E glass fibre filled polytetrafluoroethylene |
| JIS K6896-1995 | 模塑材料和擠壓材料用的聚四氟乙烯粉末 |
Polytetrafluoroethylene powder for molding and extrusion materials |
| JIS K6893-1995 | 聚四氟乙烯水分散體的試驗方法 | Testing methods for polytetrafluoroethylene aqueous dispersion |
| JIS K6895-1995 | 聚四氟乙烯零部件尺寸的測定方法 | Method for determination of dimension of polytetrafluoroethylene parts |
| BS 3G 210-1996 | 單芯和多芯鍍銀銅導體(190℃)或鍍鎳銅導體(260℃)聚四氟乙烯絕緣設備軟線和電纜規范 | Specification for PTFE insulated equipment wires and cables, single- and multi-core, with silver plated copper conductors (190 °C) or nickel plated copper conductors (260 °C) |
| BS 5306-5.2-1984 | 住宅滅火裝置及設備.第5部分:哈朗(聚四氟乙烯)滅火系統.第2節:哈朗(聚四氟乙烯)1211全溢流裝置 | Code of practice for fire extinguishing installations and equipment on premises - Halon systems - Halon 1211 total flooding systems |
| BS M 57-1985 | 航空航天用聚四氟乙烯高溫盤旋狀軟管組件規范 | Specification for high temperature convoluted hose assemblies in polytetrafluoroethylene (PTFE) for aerospace applications |
| BS M 56-1985 | 航空航天用聚四氟乙烯管密度和相對密度的測定方法 | Methods for determination of density and relative density of polytetrafluoroethylene (PTFE) tubing for aerospace applications |
| BS EN 60454-3-14-2002 | 電工用壓敏膠帶規范.各項材料規范.涂壓敏膠粘劑的聚四氟乙烯薄膜帶.第14活頁:涂壓敏膠粘劑的聚四氟乙烯薄膜 | Specifications for pressure-sensitive adhesive tapes for electrical purposes - Specifications for individual materials - Polytetrafluoroethylene film tapes with pressure-sensitive adhesive - Sheet 14: Polytetrafluoroethylene film tapes with pressure-sensitive adhesive |
| BS EN 60684-3-145 to 147-2001 | 絕緣軟套管規范.各型套管規格要求.擠制聚四氟乙烯套管 | Specification for flexible insulating sleeving - Specification requirements for individual types of sleeving - Extruded PTFE sleeving - Extruded PTFE sleeving |
| BS EN 60684-3-240 to 243-2002 | 絕緣軟套管.各種型號軟套管規范要求.熱收縮聚四氟乙烯(PTFE)絕緣軟套管 |
Specification for flexible insulating sleeving - Specification requirements for individual types of sleeving - Heat-shrinkable PTFE sleeving |
| BS EN 61196-2-2003 | 射頻電纜.規范.聚四氟乙烯(PTFE)絕緣半硬射頻同軸電纜分規范 | Radio-frequency cables - Specifications - Sectional specification for semi-rigid radio-frequency and coaxial cables with polytetrafluoroethylene (PTFE) insulation |
| BS EN ISO 13000-2-2006 | 塑料.聚四氟乙烯(PTFE)半成品.試樣的制備和性能測定 |
Plastics - Polytetrafluoroethylene (PTFE) semi-finished products - Preparation of test specimens and determination of properties |
| BS EN ISO 13000-1-2006 | 塑料.聚四氟乙烯(PTFE)半成品.要求和名稱與符號 | Plastics - Polytetrafluoroethylene (PTFE) semi-finished products - Requirements and designation |
| BS EN 4166-2005 | 航空航天系列.三件彈簧張力夾具.聚四氟乙烯軸襯 | Aerospace series - Clips, spring tension, three parts - PTFE bushes |
| BS EN 1337-7-2004 | 結構軸承.球面和圓柱形聚四氟乙烯軸承 | Structural bearings — Part 7: Spherical and cylindrical PTFE bearings |
| BS ISO 8829-2-2006 | 航空.聚四氟乙烯(PTFE)內軟管組件試驗方法.非金屬編制物 | Aerospace - Test methods for polytetrafluoroethylene (PTFE) inner-tube hose assemblies - Non-metallic braid |
| BS ISO 8913-2007 | 航空航天.輕型聚四氟乙烯(PTFE).分級:400 °F/3000 psi (204 ℃/20684 kPa)和204℃/21000 kPa (400 °F/304 | Aerospace - Lightweight polytetrafluoroethylene (PTFE) hose assemblies, classification 400 °F/3000 psi (204 °C/20684 kPa) and 204 °C/21000 kPa (400 °F/3046 psi) - Procurement specification |
| DIN ISO 7258-1987 | 航空航天.航空航天用聚四氟乙烯(PTFE)軟管.密度和相對密度的測定方法.與ISO7258, 1984相同 | Aerospace; polytetrafluoroethylene (PTFE) tubing for aerospace applications; methods for the determination of the density and relative density; identical with ISO 7258, edition 1984 |
| DIN 65374-1989 | 航空航天.聚四氟乙烯.(PTFE)半成品和模壓件.技術規范 | Aerospace; polytetrafluoroethylene (PTFE) semi-finished products and moulded parts; technical specification |
| DIN 16782-2-1991 | 聚四氟乙烯(PTFE)模塑材料.試樣的制備和性能測定 | Polytetrafluoroethylene (PTFE) moulding materials; preparation of specimens and determination of properties |
| DIN 16782-1-1991 | 聚四氟乙烯(PTFE)模塑材料.分類和名稱 | Polytetrafluoroethylene (PTFE) moulding materials; classification and designation |
| DIN 28148-1992 | 搪瓷鋼制攪拌容器的聚四氟乙烯外殼密封 | PTFE envelope gaskets for glass lined agitator vessels |
| DIN 28091-3-1995 | 密封板的交貨技術條件.第3部分:聚四氟乙烯基密封材料.要求和試驗 | Technical delivery conditions for gasket sheets - Part 3: PTFE-based gasket materials (TF); requirements and testing |
| DIN ISO 10502-1997 | 航空航天.溫度為230℃以下氣壓為10500KPa時使用的聚四氟乙烯(PTFE)軟管.采購規范 | Aerospace - Hose assemblies in polytetrafluoroethylene (PTFE) for use up to 232 °C and 10500 kPa - Procurement specification (ISO 10502:1992) |
| DIN 3535-6-1999 | 供氣用密封墊.第6部分:氣閥、煤氣設備和煤氣主管道用基于合成纖維、石墨或聚四氟乙烯的密封墊材料 | Gaskets for gas supply - Part 6: Gasket materials based on synthetic fibres, graphite or polytetrafluoroethylen (PTFE) for gas valves, gas appliances and gas mains |
| DIN 30660-1999 | 供氣、供水及水暖設備用密封材料.家用設施金屬螺紋連接用非硬化連接密封材料和聚四氟乙烯密封帶 | Sealing materials for gas and water supply as well as water heating systems - Non-hardening jointing compounds and polytetrafluoroethylene (PTFE) tapes for metallic threaded joints in domestic installations |
| DIN 2874-2002 | 帶聚四氟乙烯或PFA襯里的鋼制法蘭管道和鋼制與鑄鐵法蘭配件.技術規范 |
Steel flanged pipes and steel and cast iron flanged fittings lined with PTFE or PFA - Technical specifications |
| DIN EN 60454-3-14-2002 | 電工用壓敏膠帶.第3部分:各型材料規范.第14節:涂壓敏粘合劑的聚四氟乙烯薄膜帶(IEC 60454-3-14:2001) | Pressure-sensitive adhesive tapes for electrical purposes - Part 3: Specifications for individual materials; Sheet 14: Polytetrafluoroethylene film tapes with pressure-sensitive adhesive (IEC 60454-3-14:2001); German version EN 60454-3-14:2001 |
| DIN EN 60684-3-145 bis 147-2002 | 絕緣軟套管.第3部分:專用型套管規范.145活頁和147活頁:擠制聚四氟乙烯(PTFE)套管 (IEC 60684-3-145 to 147: | Flexible insulating sleeving - Part 3: Specifications for individual types of sleeving; Sheets 145 to 147: Extruded PTFE sleeving (IEC 60684-3-145 to 147:2001); German version EN 60684-3-145 to 147:2001 |
| DIN EN 60684-3-240 bis 243-2003 | 絕緣軟管.第3部分:各型軟管規范.240至243節:熱收縮聚四氟乙烯(PTFE)絕緣軟管 | Flexible insulating sleeving - Part 3: Specifications for individual types of sleeving; Sheets 240 to 243: Heat-shrinkable PTFE sleeving (IEC 60684-3-240 to 243:2002); German version EN 60684-3-240 to 243:2002 |
| DIN EN 61196-2-2004 | 射頻電纜.第2部分:聚四氟乙烯絕緣的半剛性射頻電纜和同軸電纜分規范 | Radio-frequency cables - Part 2: Sectional specification for semi-rigid radio-frequency and coaxial cables with polytetrafluoroethylene (PTFE) insulation (IEC 61196-2:1995); German version EN 61196-2:2003 |
| DIN EN 1337-7-2004 | 結構軸承.第7部分:球面和柱面聚四氟乙烯軸承 | Structural bearings - Part 7: Spherical and cylindrical PTFE bearings; German version EN 1337-7:2004 |
| DIN EN ISO 13000-1-2006 | 塑料.聚四氟乙烯(PTFE)半成品.第1部分:要求和名稱與符號(ISO 13000-1-2005).德文版本 EN ISO 13000-1-2005 | Plastics - Polytetrafluoroethylene (PTFE) semi-finished products - Part 1: Requirements and designation (ISO 13000-1:2005); German version EN ISO 13000-1:2005 |
| DIN EN ISO 13000-2-2006 | 塑料.聚四氟乙烯(PTFE)半成品.第2部分:試樣的制備和特性的測定 (ISO 13000-2-2005).德文版本 EN ISO 13000- | Plastics - Polytetrafluoroethylene (PTFE) semi-finished products - Part 2: Preparation of test specimens and determination of properties (ISO 13000-2:2005); German version EN ISO 13000-2:2005 |
| IEC 61196-2-1995 | 射頻電纜 第2部分:聚四氟乙烯(PTFE)絕緣半硬射頻同軸電纜分規范 | Radio-frequency cables - Part 2: Sectional specification for semi-rigid radio-frequency and coaxial cables with polytetrafluoroethylene (PTFE) insulation |
| IEC 60454-3-14-2001 | 電工用壓敏粘帶 第3部分：單項材料規范 活頁14：涂壓敏粘合劑的聚四氟乙烯薄膜帶 | Pressure-sensitive adhesive tapes for electrical purposes - Part 3: Specifications for individual materials; Sheet 14: Polytetrafluoroethylene film tapes with pressure-sensitive adhesive |
| IEC 60684-3-145 to 147-2001 | 絕緣軟套管.第3部分:各種型號套管的規范.第145和147活頁:擠壓聚四氟乙烯套管 | Flexible insulating sleeving - Part 3: Specifications for individual types of sleeving; Sheets 145 to 147: Extruded PTFE sleeving |
| IEC 60684-3-240 to 243-2002 | 絕緣軟管.第3部分:各種型號軟管規范.第240至243篇:熱收縮聚四氟乙烯(PTFE)絕緣軟管 |
Flexible insulating sleeving - Part 3: Specifications for individual types of sleeving; Sheets 240 to 243: Heat-shrinkable PTFE sleeving |
| ISO 7313-1984 | 航空器 聚四氟乙烯(PTFE)制的高溫盤卷軟管組件 |
Aircraft; High temperature convoluted hose assemblies in polytetrafluoroethylene (PTFE) |
| ISO 7258-1984 | 航空航天用聚四氟乙烯(PTFE)管材 密度和相對密度的測定方法 |
Polytetrafluoroethylene (PTFE) tubing for aerospace applications; Methods for the determination of the density and relative density |
| ISO 10502-1992 | 航空航天.溫度為230℃及以下、壓力為10500 kPa下使用的聚四氟乙烯(PTFE)軟管組件.采購規范 |
Aerospace; hose assemblies in polytetrafluoroethylene (PTFE) for use up to 232 °C and 10500 kPa; procurement specification |
| ISO 9938-1994 | 航空航天 強度溫度等級為204℃/28000 kPa的聚四氟乙烯軟管組件 采購規范 |
Aerospace - Polytetrafluoroethylene (PTFE) hose assemblies, classification 204 C/28 000 kPa - Procurement specification |
| ISO 9528-1994 | 航空航天 等級為21000kPa/204℃標準型聚四氟乙烯(PTFE)軟管組件 采購規范 |
Aerospace - Standard-weight polytetrafluoroethylene (PTFE) hose assemblies, classification 204 C/21 000 kPa - Procurement specification |
| ISO 13000-2-2005 | 塑料.聚四氟乙烯(PTFE)半成品.第2部分:試樣的制備和性能的測定 |
Plastics - Polytetrafluoroethylene (PTFE) semi-finished products - Part 2: Preparation of test specimens and determination of properties |
| ISO 13000-1-2005 | 塑料.聚四氟乙烯(PTFE)半成品.第1部分:要求和名稱與符號 |
Plastics - Polytetrafluoroethylene (PTFE) semi-finished products - Part 1: Requirements and designation |
| ISO 8829-2-2006 | 航空.聚四氟乙烯(PTFE)內軟管組件試驗方法.第2部分:非金屬編織物 |
Aerospace - Test methods for polytetrafluoroethylene (PTFE) inner-tube hose assemblies - Part 2: Non-metallic braid |
| ISO 8913-2006 | 航空航天.輕型聚四氟乙烯(PTFE)軟管組件.等級：400℉/3000psi(204℃/20684kPa)和204℃/21000 kPa(400℉/304 | Aerospace - Lightweight polytetrafluoroethylene (PTFE) hose assemblies, classification 400 °F/3 000 psi (204 °C/20 684 kPa) and 204 °C/21 000 kPa (400 °F/3 046 psi) - Procurement specification |
| JIS K6884-1971 | 聚四氟乙烯的一般公差(機械切削) |
General tolerance for polytetrafluoroethylene (Machine cut) |
| JIS K6892-1995 | 涂膠擠壓用聚四氟乙烯粉料的試驗方法 |
Testing methods for polytetrafluoroethylene powder for paste extrusion |
| JIS K6891-1995 | 聚四氟乙烯模塑粉料的試驗方法 |
Testing methods for polytetrafluoroethylene molding powder |
| JIS K7137-1-2001 | 塑料.聚四氟乙烯(PTFE)半成品.第1部分:要求與命名 |
Plastics -- Polytetrafluoroethylene (PTFE) semi-finished products -- Part 1: Requirements and designation |
| JIS K7137-2-2001 | 塑料.聚四氟乙烯(PTFE)半成品.第2部分:試驗樣品制備和性能測定 |
Plastics -- Polytetrafluoroethylene (PTFE) semi-finished products -- Part 2: Preparation of test specimens and determination of properties |
| JIS K6885-2005 | 螺紋密封用未燒結聚四氟乙烯帶 |
Unsintered polytetrafluoroethylene tapes for thread sealing |
冀公網安備 13098402000163號